How is the new tear sprayer produced?

Equipment required: aerosol filling machine

1.Introduction of new tear spray function

New standard visual filling tear-gas ejector, standard police tear-gas ejector is also called tear-gas, and some local public security bureaus are also called chili water. Anyway, they all refer to police tear-gas ejector. The commonly used tear-gas ejector is one-time, and it is not used up, which is not for the vast township police stations with limited funds. Suspicion is a burden.

In response to this situation, the Ministry of Public Security issued a new standard for the parameters of police tear ejector in the new situation – repeatable filling of police tear ejector; compared with disposable tear ejector, the new standard repeatable filling tear ejector is a great progress, the new police tear gas: visual repeatable filling of tear ejector Tear ejector, visual repetitive filling of self-defense spray covers the police and civil areas.

The tear ejector is a miniature special police equipment, which can be repeatedly filled to reduce the cost of law enforcement. Its main stimulant component is OC, which has no secondary harm to human body and no pollution to the environment. It can strongly stimulate human eyes, nasal cavity, oral cavity, skin and upper respiratory organs. It can make people cough, tears, burning pain of skin and eyes, dyspnea, weakness and other symptoms.

2.Performance and structure of tear ejector

Tear ejector is mainly composed of visible gas storage tank, bag and nozzle assembly.

1. 1. The gas storage tank is a place to prevent the bag and store compressed air, and to connect the nozzle assembly.
   2. The pouch is mainly used to store tear gas (OC), 70 ml.
   3. The nozzle assembly mainly guarantees the safety of the service process and the implementation of tear spraying components.

3.Method of using tear gas ejector

1. The first step is to rotate the cover counterclockwise with the forefinger and thumb until the handle pops out. Reference to the direction at the top of the cover.
2. The second step is to make the jet nozzle aim at the target, press down the handle with thumb, until there is a tear generator, which can be sprayed continuously or by point. The spacing pressure handle is needed for the point shooting.

4.Production equipment and filling of tear ejector

Tear ejector is called aerosol product in the industry. According to the structure characteristics of tear ejector, the production equipment needed is binary aerosol filling machine. It is first put into the bag valve, through the sealing inflator, seal and fill the compressed air, then inject tear through the forced irrigation machine, and finally, buckle the nozzle assembly.

Tear ejector filling equipment for different investment scale enterprises, there are different production equipment, small equipment and pipeline equipment. Below, we recommend two different types of equipment for your reference.

1.CJXH-1800GT Small Automatic Binary Aerosol Filling Machine

This machine is a highly efficient filling equipment for aerosol binary packaging products. It has beautiful appearance, programmable control of micro-computer (PLC) and photoelectric sensor. The machine is a new type of equipment independently developed by the company. It consists of one sealing inflator and two to three forced irrigation machines. Linear screw bottle pushing system replaces the original transmission. In the process of equipment operation, point automatic and automatic modes can be selected, which is flexible and efficient. The machine sealed the valve with bag, filled propellant or compressed air at the same time, and then injected liquid raw materials into the bag by high pressure. The raw material can be completely separated from the tank body, thus solving the trouble caused by the corrosion of the raw material to the tank body or the incompatibility of gas and liquid. The output is 600-1500 cans/hour.

2.CJXH-2800G Pipeline of Fully Automatic Binary Aerosol Filler

This machine is composed of mechanism bottle table, binary packing and sealing inflator, binary packing and filling machine, weighing machine, water bath leak detector, button nozzle machine, outer cover machine, on-line spraying code, conveyor belt and PLC control program. It is suitable for large-scale production enterprises with high output and high speed. The main seals are imported parts, which can be used for filling various valves. The booster pump adopts large capacity two-way boosting, so the filling speed is fast and the metering is accurate. PLC control system, high automation, simple operation, accurate filling. The sealing has the advantages of good air tightness, and the inflatable pressure can be adjusted arbitrarily. The output is 20-40 cans per minute.

5.Notes for Tear Ejector

Tear-gas ejector belongs to police equipment. If used improperly, there will be potential safety hazards. In order to ensure safety, please pay attention to the following matters:

1. Make sure the pressure handle is closed when not in use. The pressure handle should be fully opened when used.
2. The capacity of the remaining liquid in the tank can be observed according to the transparent viewing window on the side and replaced as appropriate. If a large number of bubbles are found in the interior, indicating that the pressure is invalid, please replace them immediately (a small number of bubbles belong to the normal phenomenon).
3. If you touch skin and glasses carelessly, you need to wash your skin and eyes with plenty of water. After cleaning, don’t apply snow cream or plaster on your skin. If you wear contact lenses, you should take them off and recover within half an hour.
4. When using this product, do not use against the wind! Do not use alcohol to wipe the ejector tank.
5. After using this product, it should be recycled and properly preserved.