The function of surface wax
The surface wax is also called instrument wax, which is a kind of maintenance product specially for the texture of automobile leather ornaments and instruments, which can effectively prevent the aging of the instrument panel and interior trim, and also has the liquid wax with the function of decontamination and anti-static. Most of the interior maintenance of the car is done by the driver independently. In order to ensure the quality of the interior maintenance, we should adopt correct operation.
Many car owners used to clean car with brushes, but it will damage the interior accessories. Then, a new product – surface wax is developed, which can make the leather seats and the interior canopy of the car recover the natural luster, and keep it fresh and soft.
Surface wax is an automobile maintenance product and also an aerosol product. When using, press the spray nozzle at about 20cm of the object, then spray the wax evenly with clean soft cloth. When leather seats and instrument panel need polishing, wait a moment after the object is waxed, and then wipe with clean soft cloth to make it bright; When used to beautify the tire, the sludge attached to the tire surface shall be removed first, and then coated with surface wax; When used as a protection against surface roughness or rust, the surface wax can be sprayed directly.
Introduction of wax production equipment:
The production of surface wax is very simple, which is to make the finished product by using aerosol technology. The specific production process is: water purification, reactor production, finished product, filling, upper valve sealing, filling injection, nozzle, big cap.
Water is one of the important components of surface wax raw materials. We may be thinking about why ordinary tap water can not be used, the water contains various minerals and impurities, so it needs to be purified first.
With the raw materials of surface wax, how can we mix into the finished products we say? Simple mixing is certainly not possible. It is necessary to use reaction kettle and professional mixing tank to realize the heating, evaporation, cooling and low-speed mixing functions required by the process. The reactor is composed of the kettle body, kettle cover, jacket, agitator, transmission device, shaft seal device and support. When the diameter of the mixing device is relatively large, it can be used for multi-layer mixing blades, or can be selected according to the requirements of users.
Wax filling equipment:
Product Name: HDC 100at, general small and automatic aerosol filling line
The machine is improved on the basis of 100A type. The whole machine is composed of a liquid filling machine, an automatic valve loading machine, a sealing machine and a jetting agent inflator. The linear screw bottle pushing system replaces the original transmission, and can select the point motion and automatic mode during the operation of the equipment, which is flexible and efficient. Can be added bottle machine, pressure nozzle machine, buckle cover machine, inkjet machine and packaging table. At present, the aerosol industry has entered a rapid growth period. The products of aerosol are constantly updated. The new aerosol which is filled with the sprayer after vacuumizing in the tank is more likely to be favored by the market. The vacuum pumping system can be customized by samples. The machine has been widely used in daily chemical, automotive supplies, cleaning, hygiene, industry and construction, food and medicine, and other related industries, such as moisturizing spray, wax, chemical cleaning agent, air freshener, self spray paint, carton hot pot, mountain tourist canister and other aerosol products.
Technical parameters production speed 800-1800cans/hour liquid filling volume 10-1000ml gas filling volume 10-750ml repeated filling accuracy ± 1% applicable air mist tank diameter 35-65mm applicable air mist tank height 70-330mm valve 25.4mm (1 inch) air source 0.75-0.9mpa air consumption 1.3m ³/ min