What are the standards for the production of aerosol cosmetics?

Aerosol cosmetics are more and more popular because of their convenience and hygiene. Common water spray, sunscreen spray, hair removal spray, etc., usually work or go out, can be easily sprayed, with water spray as an example, the small droplets sprayed with nutrients, can replenish skin moisture, and form a protective film on the outer layer of the skin, reducing the damage of the external environment. What’s more, its nozzle design can avoid secondary pollution and make it easy to use. Therefore, more and more people begin to use aerosol cosmetics.

Due to the popularity of aerosol cosmetics, cosmetics manufacturers gradually began to develop aerosol cosmetics, so what specifications should aerosol cosmetics processing plants have? Here is a brief introduction of some specifications of aerosol cosmetics processing plants for you.

The professional aerosol cosmetics production and processing factory has strict requirements for the construction of the enterprise’s factory. The location, environment, area and other factors of the factory construction have a direct impact on the quality of cosmetics. We have investigated the cosmetics production and processing factories around the world to build a professional aerosol cosmetics production and processing factory to meet the following requirements, as follows:

1. The production and processing plant of aerosol cosmetics should be located in a clean and tidy area. The surrounding needs to avoid pollution sources that may affect product safety. The cleaner the production environment, the more safe the product filling can be.

2. The construction of the cosmetics production and processing workshop should be reinforced concrete or steel frame structure to ensure the dry environment and excellent waterproof effect. The planning and construction of cosmetics production and processing plant and equipment can give a greater protection to the products, and it is more convenient for the cleaning and protection of the plant.

3. The internal construction of the workshop shall meet the health requirements. The production area and non production area must have strict barrier area to prevent the pollution of raw materials and products cosmetics. During the construction, it is necessary to investigate and refer to how the professional cosmetics production and processing factory is built. According to the needs of practical production, it is necessary to set up dressing rooms, barrier areas, manufacturing rooms and other production workshops with short function areas.

4. The planning and construction of a series of equipment such as ground, wall, ceiling, doors and windows in the workshop should be based on the principle of easy cleaning. The logistics channel of the workshop should be wide and free of obstruction planning. The corridor visited by the guests should have glass partition walls with the production area.

5. The equipment for producing aerosol cosmetics must meet the standards. The design and selection of production equipment must meet the requirements of product characteristics and shall not affect the product quality. The design and installation of the equipment shall be easy to operate, clean and disinfect. All materials of equipment, tools, pipes, etc. in direct contact with raw materials and products shall be confirmed to ensure no chemical pollution, physical pollution and microbial pollution.

6. Reasonable cleaning and disinfection procedures shall be formulated for aerosol cosmetics production equipment. The surface of the production equipment (including the auxiliary equipment required for production) in direct contact with the product shall be flat, bright and clean, free of dead angle, easy to clean, easy to disinfect and corrosion-resistant. The lubricant, cleaner and disinfectant selected shall not pollute the product or container.