Production process of new type tear gas sprayer

1. New tear spray function

The new standard can be filled with tear gas ejector, the standard police tear gas ejector is also called tear gas, and the public security bureau in some places is also called pepper water. Anyway, it refers to the police tear gas ejector. The commonly used tear gas ejector is once Sexual, there will be nothing when used up. This is undoubtedly a burden for the vast township police stations with funding restrictions.

In response to this situation, the Ministry of Public Security issued a new standard police tear gas ejector parameter requirements under new conditions-refillable police tear gas ejector; compared to disposable tear gas ejector, the new standard refillable type The tear gas ejector is a big improvement, the new police tear gas: the visual refillable tear gas ejector, the visual refillable self-defense spray covers the police and civilian fields.

This kind of tear gas sprayer is a miniature special police equipment, which can be filled repeatedly to reduce the cost of law enforcement. The main irritant component is OC, which has no secondary harm to the human body and no pollution to the environment. It can have a strong stimulating effect on the eyes, nasal cavity, oral cavity, skin and upper respiratory organs of the human body, and can cause people to quickly cough, tear, and skin. Symptoms such as burning eyes, difficulty breathing, and general weakness.

2. Performance and structure of tear gas ejector

The tear gas ejector is mainly composed of visible gas storage tank, bladder and nozzle components:

1. The air storage tank is a place to prevent pockets and store compressed air, and connect the nozzle assembly.
2. The sac is mainly used to store tear gas (OC), 70ml.
3. The nozzle assembly is mainly used to ensure the safety of the service process and the implementation of tear gas injection.
4. How to use tear gas jet
5. In the first step, use your index finger and thumb to rotate the safety cover counterclockwise until the pressing handle pops out. Refer to the direction of the top of the insurance cover.
6. In the second step, aim the jet nozzle at the target, and press down the handle with your thumb until the tear gas is ejected. It can be sprayed continuously or bursting, and bursting requires an intermittent pressure handle.

Fourth, tear gas ejector production equipment and filling

The tear gas ejector is called an aerosol product in the industry. According to the structural characteristics of the tear gas ejector, the required production equipment is a binary aerosol filling machine, which is first put into the bag valve, sealed and filled and compressed through the sealing inflator Air is injected into the tear gas through a forced liquid filling machine, and finally, the nozzle assembly is buckled.

Tear sprayer filling equipment is aimed at enterprises of different investment scales, with different output equipment, small equipment and assembly line equipment. The following editor recommends two equipment with different output for your reference.

1. Fully automatic binary packaging aerosol filling machine
   

This machine is an equipment machine for efficient filling of aerosol binary packaging products. It has a beautiful appearance, microcomputer (PLC) programmable control, and photoelectric sensor. This machine is a new type of equipment independently developed by Jinhu Fuda Machinery Co., Ltd. It consists of a sealing aerator and 2-3 forced liquid filling machines. The linear screw push bottle system replaces the original transmission, and the jog and automatic modes can be selected during the operation of the equipment, which is flexible and efficient. The machine fills the propellant or compressed air while sealing the valve with the bag, and then injects the liquid material into the bag at high pressure. The raw material can be completely isolated from the tank body, thereby solving the trouble caused by the raw material corroding the tank body or the gas-liquid incompatibility. The output is 600-1500 cans/hour.

2. Fully automatic packaging aerosol filling production line

The machine consists of a bottle unscrambler workbench, a binary packaging and sealing inflator, a binary packaging filling machine, a weighing machine, a water bath leak detector, a nozzle buckle machine, a capping machine, online coding, conveyor belt, and PLC control programs. , This machine is suitable for large-scale production enterprises, with high output and fast speed. The main seals are imported, which can be used for filling various valves. The booster pump uses large-capacity two-way booster, so the filling speed is fast and the measurement is accurate. PLC control system, high degree of automation, simple operation, accurate filling. The seal has good air tightness and the inflation pressure can be adjusted at will. The output is 20-40 cans per minute.

Five, the precautions of tear gas ejector

Tear gas ejectors are police equipment. Improper use may cause safety hazards. To ensure safety, please pay attention to the following:

1. When not in use, make sure that the pressing handle is closed. The pressing handle should be in a fully open state when in use.
2. The capacity of the remaining liquid in the tank can be observed according to the transparent visual observation window on the side and replaced as appropriate. If you find a lot of bubbles inside, it means that the pressure is invalid, please replace it immediately (a few bubbles are normal).
3. If you accidentally touch your skin and glasses, you need to wash your skin and eyes with a lot of water. Do not apply creams, plasters, etc. to the skin after washing. If you wear contact lenses, take them off and you can basically recover within half an hour.
4. When using this product, do not use it against the wind! To avoid injury to yourself, do not use alcohol to wipe the ejector tank.
5. After using this product, it should be recycled and disposed of, and the used tear gas ejector should be properly stored.